#Port forward network utilities bundle how to#
#Port forward network utilities bundle software#

RFC 1483 or local bridged or routed clients cannot have overlapping IP addresses, even across different interfaces.

For each SESM server, all connected SSGs must have the same port-bundle length.

Overlapping IP users cannot be connected to the same service or to different services that are bound to the same uplink interface.

Overlapping IP users cannot come in on the same SSG downlink interface.

Overlapping subscriber IP addresses are supported only for hosts connected to SSG through routed point-to-point interfaces.

All SSG source IP addresses configured with the source ip command must be routable in the management network where the SESM resides.

The SSG Port-Bundle Host Key feature can be enabled or the port-bundle length can be changed only when there are no SSG host objects present.

The SSG Port-Bundle Host Key feature must be separately enabled at the SESM and at all connected SSGs.

The SSG Port-Bundle Host Key feature has the following restrictions: Restrictions for SSG Port-Bundle Host Key You must enable SSG by using the ssg enable command before you can configure the SSG Port-Bundle Host Key feature. You can disable CEF at the individual interface level without affecting SSG. You must enable Cisco Express Forwarding (CEF) on the router before SSG functionality can be enabled.

destination range (without an IP address specified).

If you are using an earlier release of SSD, disable the SSG Port-Bundle Host Key feature using the no ssg port-map global configuration command.Ī default network must be configured and routable from SSG in order for the following commands to be effective: The SSG Port-Bundle Host Key feature requires Cisco Service Selection Dashboard (SSD) Release 3.0(1) or Cisco SESM Release 3.1(1).

Command Reference, page 12 Prerequisites for SSG Port-Bundle Host Key.

#Port forward network utilities bundle how to#

How to Configure SSG Port-Bundle Host Key, page 5.

Information About SSG Port-Bundle Host Key, page 3.

Restrictions for SSG Port-Bundle Host Key, page 2.

Prerequisites for SSG Port-Bundle Host Key, page 2.

If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.

#Port forward network utilities bundle software#

Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support.

The CLI enhancements from 12.2(16)B were integrated into Cisco IOS Release 12.3(4)T.įeature History for the SSG Port-Bundle Host Key Featureįinding Support Information for Platforms and Cisco IOS Software Images The command-line interface (CLI) was enhanced to simplify the configuration of this feature. This feature was integrated into Cisco IOS Release 12.2(13)T. This feature was introduced on the Cisco 6400 series.